Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.     

Modified two-grid method for solving coupled Navier-Stokes/Darcy model based on Newton iteration

A new decoupled two-gird algorithm with the Newton iteration is proposed for solving the coupled Navier-Stokes/Darcy model which describes a fluid flow filtrating through porous media. Moreover the err...     

Preparation of two-dimensional molybdenum disulfide for NO2 detection at room temperature

In this work, the two-dimensional MoS₂ film was prepared by sulfuring the molybdenum atomic layer on SiO₂/Si substrate. The reaction temperature, heating rate, holding time and carrier gas flow rate were investigated comprehensively. The quality of MoS₂ film was characterized by optical microscopy, atomic force microscopy, Raman and photoluminescence spectroscopy. The characterization results showed that the optimum synthesis parameters were heating rate of 25 °C/min, reaction temperature of 750 °C, holding time of 30 min and carrier gas velocity of 100 sccm. The MoS₂ gas sensor was fabricated and its gas sensing performance was tested. The test results indicated that the sensor had a good response to both reducing gas (NH₃) and oxidizing gas (NO₂) at room temperature. The sensitivity to 100 ppm of NO₂ was 31.3%, and the response/recovery times were 4 s and 5 s, respectively. In addition, the limit of detection could be as low as 1 ppm. This work helps us to develop low power and integrable room temperature NO₂ sensors.     

The “Fingerprint” of a freshwater microalga Scenedesmus sp. LX1: Visualizing the composition of its soluble algal products

The composition of soluble algal products was visualized by a fingerprint analytical method.     

On the complexity of extending the convergence ball of Wang’s method for finding a zero of a derivative

Ball convergence results are very important, since they demonstrate the complexity in choosing initial points for iterative methods. One of the most important problems in the study of iterative methods is to determine the convergence ball. This ball is small in general restricting the choice of initial points. We address this problem in the case of Wang’s method utilized to determine a zero of a derivative. Finding such a zero has many applications in computational fields, especially in function optimization. In particular, we find the convergence ball of Wang’s method using hypotheses up to the second derivative in contrast to earlier studies using hypotheses up to the fourth derivative. This way, we also extend the applicability of Wang’s method. Numerical experiments used to test the convergence criteria complete this study.     

Polarized SERS Controlled by Anisotropic Growth on Ordered Curvature Substrate

Colloidal lithography is an efficient and low-cost method to prepare an ordered nanostructure array with new shapes and properties. In this study, square-shaped and cone-shaped Au nanostructures were obtained by 70° angle deposition onto polystyrene bead array with the diameter of 500 nm when a space of 120 nm is created between the neighbor beads by plasma etching. The gaps between the units decrease when the Au deposition time increases, which leads to the polarized enhanced local field, in agreement with the surface-enhanced Raman scattering spectra (SERS) observations and finite-difference time-domain (FDTD) simulations. When the Au deposition time increased to 5 min, 5 nm gaps form between the neighbor units, which gave an enhancement factor of 5 × 10⁹. The SERS chip was decorated for the detection of the liver cancer cell marker Alpha-fetoprotein (AFP) with the detection limit down to 5 pg/mL.